Standard O-Ring & Seal Products
More than 3,500 standard profiles in AS568 and metric sizes are available alongside custom molding. Browse by size, material or temperature requirement:
Which Rubber Sealing Product Do You Need?
Match the part to its geometry before requesting a quote:
| Product | Typical geometry | Common use |
|---|---|---|
| Seal (lip/oil/U-seal) | Molded profile with a sealing lip or edge | Rotating shafts, sliding rods, dynamic sealing |
| O-Ring | Round cross-section ring | Static or dynamic sealing in a machined groove |
| Gasket | Flat or molded flange shape | Static sealing between two mating surfaces |
| Washer | Flat disc, often with a center hole | Load spreading, vibration damping, light sealing |
| Grommet | Ring with a channel or bore | Cable/wire pass-through, panel edge protection |
Choose an O-ring when the part seals through round cross-section squeeze in a machined groove. FKM/FFKM and silicone are available in AS568 and metric sizes.
For flat discs or spacers used across a bolted joint, see Custom Rubber Washers. For brackets, covers and other non-standard cross-sections, see Custom Molded Rubber Parts.

Molded Rubber Seal Types We Manufacture
Production covers the shapes that fall specifically under "seal" rather than O-ring or gasket:
- Lip seals and rotary shaft/oil seals
- U-seals and V-seals for reciprocating rods
- Custom profile and cross-section seals molded to a drawing
- Diaphragm-style seals for pressure and media control
- Rubber-to-metal bonded seals for structural or vibration-isolating joints
- Sealing rings for valves and pumps, including high-pressure fluid system applications
ISO 13485:2016 certification and FDA/NSF-compliant compounds support medical device housings and fluid-contact seals, molded as Medical Silicone Molded Seals for OEM Assemblies.
Manufacturing Processes
The production process is selected according to the seal geometry and performance requirements:
-
1
Injection and compression molding
For closed geometries, grooves, logos and detailed molded features.
-
2
Extrusion
For profiles with a constant cross-section, such as window, door and cabinet seals. Spliced joints should be considered during design.
-
3
Die-cutting and water-jet cutting
For flat seals with uniform thickness cut from sheet stock.
-
4
Rubber-to-metal bonding
For seals that require a rigid carrier or structural support.
Material Options for Custom Seals
OEM rubber seals need a compound matched to the fluid, temperature and regulatory environment before tooling starts, not after a failure in the field:
The NBR, FKM, and EPDM O-ring selection guide breaks down fluid compatibility and temperature limits for the three most-requested compounds.
Precision & Performance Specs
Two tolerance grades apply depending on how critical the dimension is — a standard tolerance grade for general fits, and a tighter precision tolerance grade for critical dimensions held with matched-metal tooling:
| Dimension Range | Standard | Precision |
|---|---|---|
| 0–10 mm | ±0.10 mm | ±0.02 mm |
| 10–25 mm | ±0.15 mm | ±0.05 mm |
| 25–50 mm | ±0.20 mm | ±0.08 mm |
| 50–100 mm | ±0.25 mm | ±0.10 mm |
Compound formulations extend service across roughly –60°C to +325°C.
Chemical compatibility is checked against a reference library of 500+ fluids, gases, and chemicals during material qualification. Compatibility with your specific media is confirmed at quoting rather than assumed from the general library.
Quality Certifications
-
IATF 16949:2016 certified
-
ISO 13485:2016 certified
-
UL certified for electrical applications
-
FDA and NSF compliant materials
-
SPC and Six Sigma methods targeting Cpk > 1.33 consistency
Industries We Serve
-
Automotive Rubber Seals for underhood and body sealing
-
-
-
-
Medical and general industrial assemblies supported by the same ISO 13485:2016 and IATF 16949:2016 quality system
ON-TIME DELIVERY
From Drawing to Delivery

Submit the part information
Send a drawing, sketch or failed sample. STEP, IGES and most major CAD formats are accepted. The engineering team can also support 3D CAD modeling and FEA simulation.
Confirm the material and design requirements
The quote is based on the actual part. Engineering reviews:
-
Seal geometry and critical dimensions
-
Compound, Shore A hardness and media compatibility
-
Precision tolerance and production method
-
Cavity count, tooling design and expected volume
Move from prototype to production
Functional prototypes can be available in as little as 3–5 business days. MOQ, tooling cost and production lead time are quoted per part because a single-cavity prototype tool and a multi-cavity production tool require different investment and volumes.
Rubber bushings, grommets, diaphragms and bonded metal parts can be quoted alongside a seal through custom rubber parts manufacturer capabilities.
Start Project Discussion with a drawing, sketch or failed sample.
O-Ring & Rubber Seal FAQs
Answers to common questions about custom O-ring quotation, material selection, sealing conditions, compliance options and bulk order inspection.